PHOTOVOLTAICS - In stock

Ballast profile for accommodating ballasting for the FixGrid Pro system.

Building protection mat: rubber granules with aluminum lamination

Sheet metal replacement tiles and roof hook sets for Biberschwanz Rapid incl. assembly set. Please order metal replacement tiles and roof hook sets separately.

Fastening screws for components and sheets of metal.

The cost-optimized trapezoidal sheet fastening system for sheet steel and aluminum from 0.5 mm; Pay particular attention to the application instructions! Module clamps corresponding to the frame height are also required.

Sheet metal replacement tiles and roof hook sets for Biberschwanz Rapid incl. assembly set. Please order metal replacement tiles and roof hook sets separately. Compatible with the classic Schletter Solar mounting system and the Schletter ProLine series

VA quality, bar arrangement variable, front and rear adjustable, center bar can be used in three positions, pre-assembled

The simple solution for sealing worn-out roof tiles. Resistant to downpours, Weather resistance, Easy to compress, Self-adhesive on one side, Contains no substances harmful to work, Resistant to mold and microorganisms.

Heightening profile either to be clipped on or screwed in and the basic profile for the FixGrid Pro system. This heightening profile can also be used to attach other heightening profiles. The combination of several heightening profiles and a module support results in the desired module angle.

The Rapid16 module clamp is the logical further development of the proven Rapid2+ module clamp, which has been used millions of times. Due to the variable application, the number of items was drastically reduced without sacrificing the possible applications. All module clamps are equipped with a grounding pin as standard.

The RapidPro module clamp is the logical further development of the proven Rapid16 module clamp, which has been used millions of times. Due to the variable application, the number of items was drastically reduced without sacrificing the possible applications. All module clamps are equipped with a grounding pin as standard.

The RapidPro module clamp is the logical further development of the proven Rapid16 module clamp, which has been used millions of times. Due to the variable application, the number of items was drastically reduced without sacrificing the possible applications. All module clamps are equipped with a grounding pin as standard.

Please note: The tightening torque must be limited in such a way that the sheet metal folds are not deformed and the thermal expansion of the sheets is not prevented! In the case of titanium zinc sheets, it must be checked whether the folds can be loaded!

Particularly suitable for double standing seam roofs made of titanium zinc sheet. Possible dimensions of the edging fold h = 11-13 mm, b1 = 4-6 mm, b2 = max. 3 mm. The seam clamp 504 was developed together with the Rheinzink company for use on double standing seam roofs made of titanium zinc sheet and was approved by Rheinzink.

Please note: The tightening torque must be limited in such a way that the sheet metal folds are not deformed and the thermal expansion of the sheets is not prevented!

Special module support profile with elevation angle of approx. 13°.

Pre-assembled screw-in connector with elevation angle of approx. 13°. Suitable for the FixGrid18 system.

Special module support profile with elevation angle of approx. 13°.